TECHNICAL SETUP
Zero-Rewire Installation
Transform any traditional room into a high-performance smart space in under 15 minutes.
Tools You'll Need
Safety Checklist
Always turn off the main MCB before opening any switchboard.
Use a tester to ensure the wires are not live before touching them.
Do not install the module with wet hands.
If unsure, always consult a certified electrician.
PROCESS
The Setup Blueprint
Follow this industrial-standard process for a stable and safe automation hub.
Step 01
Switch off Power
Locate your main distribution board and switch off the MCB for the room. This is critical for 100% shock-proof installation.
Step 02
Open Switchboard
Carefully unscrew the faceplate of your switchboard. Maintain the layout of existing wires to make reconnecting easier.
Step 03
Sync & Wire
Follow the labeled wiring diagram on the SmartLink module. Connect Phase, Neutral, and Load wires to their respective terminals.
Step 04
Final Pairing
Secure the board back, turn on the power, and open the NKSPAIR app to complete the digital syncing process.
Still have questions?
Our technical team is available on WhatsApp to guide you through your first setup.
Talk to Technical Expert